


What you need
Most vendors include a starter kit (bulb irrigator, comb, a small bag of powder). The full set, all cheap and available anywhere:
- Squeeze-bulb irrigator or a handheld shower attachment, for flushing canals.
- Mild, unscented antibacterial soap or baby soap. A dedicated toy cleaner also works.
- Soft microfiber cloths and a lint-free towel.
- Drying stick (a cylinder of absorbent material) or a microfiber cloth to insert into canals. Many owners use a dry, unscented tampon.
- Cornstarch or baby powder (talc-free) in a shaker or a soft brush, for TPE. Silicone needs little.
- Mineral oil (plain, from a pharmacy) or the vendor's renewal oil — TPE only.
- Water-based lubricant, always, for both materials.
- Optional: a removable vaginal insert, which turns canal cleaning into rinsing a sleeve in the sink.
After every use
Ten minutes, and the one routine that can't be skipped. Warm, enclosed, damp spaces grow bacteria and mold fast.
- Flush. Fill the bulb with lukewarm water and flush each used canal until the water runs clear. Add a small amount of mild soap, work it in gently with the bulb, then flush with clean water until no suds remain. Soap left behind irritates skin and degrades TPE.
- Wipe. Wipe the surrounding skin and any area with lubricant residue using a damp cloth and a drop of soap, then a clean damp cloth. Keep water away from the neck joint and the inside of the head.
- Dry. Pat the skin dry. Insert a drying stick or rolled microfiber cloth into each canal, leave it 10–20 minutes, replace if damp, and repeat until dry. Leave the doll in a ventilated spot (legs slightly apart) for an hour if you can.
- Powder (TPE). Once completely dry, dust lightly with cornstarch and spread it with a soft brush or your hand. The skin goes from tacky to soft immediately.
With a removable insert, steps 1 and 3 become: pull the insert, wash it inside-out under the tap, dry it on a towel or a stand, powder lightly, reinsert when fully dry. Keeping two inserts means one is always dry.
Full clean (every 2–4 weeks)
The whole body, in a shower or bath. Remove the head first (most have a screw or bolt neck connector) and the wig.
- Water temperature. Lukewarm only — under about 100°F / 38°C. Hot water softens TPE and can deform it; silicone tolerates more but there's no reason to push it.
- Support the body. Seated against the back of the tub on a folded towel, or on a shower chair. Never leave a doll lying in a tub where the back of the head or the feet take the weight at a joint.
- Wash. Dilute soap in warm water and wash with a soft cloth or sponge, working from the top down. Don't scrub: TPE is soft enough to abrade, and silicone's painted finish (blush, veins, freckles) can wear.
- Rinse thoroughly. Folds, armpits, between fingers and toes, behind the ears if the head is being done too.
- Dry and powder as above, but give it longer — an hour or two in a warm, ventilated room, with joints bent slightly so creases dry.
If you don't have a tub, a thorough wipe-down with a soft cloth and two bowls (soapy and clean) works fine and is what many owners do routinely.
Drying — the step people skip
Almost every "my doll smells" or "there's mold" post on the owner forums traces to incomplete drying inside a canal. The fixes:
- Use a dedicated drying stick, and leave it in long enough. Two sticks in rotation are better than one.
- Never use heat. A hair dryer on cool is fine; on warm it will deform TPE and can craze silicone paint.
- Don't dress or store the doll until it's bone dry, including in the folds.
- If you find mold, a mild soap clean followed by a wipe with diluted hydrogen peroxide (3%) and a very thorough dry usually resolves surface growth. Deep growth in a fixed canal is the one argument for inserts.
TPE-specific care
TPE is a soft, oil-containing plastic. Over weeks, the oil migrates to the surface (that slightly tacky, shiny feel), and over months, if not replaced, the material dries, hardens and tears more easily. The care routine manages that cycle.
- Powder after every clean. Cornstarch absorbs surface oil and restores the dry, skin-like feel.
- Oil every 4–8 weeks. Rub a thin layer of plain mineral oil (or the vendor's renewal oil) into the skin, let it absorb for a few hours or overnight, then powder. More often in dry climates or if the skin looks dull. Don't over-oil: oily TPE attracts dust and lint.
- Mind the pressure points. Elbows, knees, fingers and the neck crease are where TPE splits. Pose gently; don't leave limbs bent sharply for long periods.
- Keep it away from dark fabrics. TPE absorbs dye readily. More in the stains section.
- Small tears can be repaired with TPE solvent glue sold by every vendor; clean, dry, apply sparingly, hold, powder when cured.
For why TPE needs this and silicone doesn't, see TPE vs silicone.
Silicone-specific care
Platinum silicone is non-porous and chemically stable: it doesn't absorb oil, resists stains and dye far better, and doesn't need oiling. Care is mostly about protecting the paint and avoiding the one thing that damages it.
- No oil-based or silicone-based products. Silicone lubricant bonds to silicone and makes the surface permanently tacky. Oils can swell it. Water-based lube only.
- Protect the finish. Hand-painted detail (blush, nipples, veins, freckles) is on the surface, sealed but not indestructible. Wash with a soft cloth, no scrubbing, and powder lightly if you like the feel — it isn't required.
- Handle joints gently. Silicone is less stretchy than TPE, so pulling or twisting skin at the shoulders, hips and neck can tear it where TPE would simply stretch.
- Repairs use silicone adhesive (Sil-Poxy or the vendor's equivalent), not TPE glue.
Head, face, wig and eyes
- Face. Wipe with a barely damp cloth. Don't submerge the head: eyes, lashes and the makeup are glued or painted and water inside the skull causes problems. Mouth canals rinse the same way as others, carefully, head tilted forward.
- Eyes. Dust with a soft brush. If they fog or shift, most eyes press out from behind the socket and reseat.
- Lashes and brows. If one lifts, a tiny dot of eyelash glue fixes it.
- Wig. Remove it for body cleaning. Wash synthetic wigs every month or two in cool water with a drop of shampoo, don't wring, air-dry on a stand, comb from the ends up. A wig cap under the wig keeps oil off the scalp and the wig cleaner.
- Implanted hair (some silicone heads): wash gently in place with shampoo, towel-dry, comb carefully.
Stains and dye transfer
Dye transfer from clothing is the most common cosmetic damage, and TPE is far more vulnerable than silicone. New dark jeans, cheap black lingerie and red fabrics are the usual culprits.
- Prevention. Wash new clothes several times before dressing the doll. Prefer light colors for anything worn for long periods. Use a thin white liner under dark clothes for storage. Don't store dressed in dark fabric.
- Fresh stain. Wipe with a cloth and mild soap immediately; much comes off in the first hour.
- Set stain on TPE. Vendors sell stain remover cream (a benzoyl peroxide–based paste); apply a thin layer, leave it several hours to a day, wipe, repeat. Household 10% benzoyl peroxide acne cream is the owner-forum equivalent and works on most dye. Test a hidden spot first.
- Set stain on silicone. Rarely penetrates; mild soap or a silicone-safe cleaner usually lifts it. Stubborn marks respond to the same peroxide method, used sparingly to protect paint.
- Mineral oil helps lift fresh grease marks on TPE, followed by powder.
Never use these
- Silicone-based lubricant on silicone dolls (permanent tackiness) — and it's a poor idea on TPE too.
- Oil-based lubricants, petroleum jelly, coconut oil on silicone.
- Alcohol, acetone, bleach, solvents, abrasive cleaners on either material. They strip paint and degrade the surface.
- Hot water or heated hair dryers on TPE.
- Scented soaps and strong detergents — residue irritates skin and dries TPE.
- Talc — cornstarch does the same job without the respiratory concern.
- Direct sunlight or heat sources for storage; both age TPE quickly.
Maintenance schedule
| When | TPE | Silicone |
|---|---|---|
| After each use | Flush canals, wipe, dry fully, powder | Flush canals, wipe, dry fully |
| Weekly | Quick wipe-down, check creases and joints, re-powder | Quick wipe-down, dust |
| Every 2–4 weeks | Full wash, dry, powder | Full wash, dry |
| Every 4–8 weeks | Mineral oil treatment, then powder; wash wig | Wash wig; inspect paint and joints |
| Storage | Clean, dry, powdered, undressed or in light fabric, lying flat or hung; out of sun and heat | Clean, dry, out of sun; same positions |
Storage position matters as much as cleaning for long-term condition; see how to store a sex doll.
- Rosemary Doll — our best-overall store, on the Starpery, Zelex and FanReal lists. Review
- Better Love Doll — best value, with a 30-day return window on unused dolls; pay by PayPal. Review
- Silicon Wives — US-stock dolls that ship in days. Review
Maintenance is one of the five big decisions. Our buyer's guide covers the rest.
Read the buyer's guideFAQ
How often should you clean a sex doll?
Canals after every use; a wipe-down every week or two; a full wash every 2–4 weeks; TPE oiled every 4–8 weeks.
Can you use regular soap?
Mild, unscented antibacterial or baby soap is fine for both materials. Avoid detergents, alcohol, bleach and anything oil-based on silicone.
Why is my TPE doll sticky?
Surface oil migration; it's normal. Wash, dry and powder. If it persists, it's time for mineral oil followed by powder.
Can I put a sex doll in the shower?
Yes, with the head removed, lukewarm water, and the body supported so no joint carries the weight. Dry thoroughly afterward.
Can I use silicone lube on a silicone doll?
No. It bonds with the material and leaves it permanently tacky. Water-based only, for both materials.
How do I get a smell out of a doll?
It's almost always moisture trapped in a canal. Wash with mild soap, wipe with diluted 3% hydrogen peroxide, and dry completely with a drying stick over several hours. Leave the doll ventilated and undressed for a day.
Sources
- Care and maintenance guides published by Rosemary Doll, Sexy Real Sex Dolls, Silicon Wives, Tantaly and RealDoll (accessed November 2026).
- WM Doll and Starpery factory care instructions supplied with dolls.
- The Doll Forum — maintenance, stain removal and repair threads (dollforum.com).
- Manufacturer safety data on platinum-cure silicone and TPE compatibility with oils and silicone fluids.